Polydimethylsiloxane is a linear, nonreactive polydimethylsiloxane.
Due to its chemical structure, Polydimethylsiloxane has an
outstanding property profile, which sets it apart from organic
materials such as mineral oils.
Polydimethylsiloxane is a clear, odorless and colorless liquid.
- minimal change in physical properties over a broad temperature
- excellent water-repellent properties
- good dielectric properties
- low surface tension and thus high surface activity
- chemically highly unreactive
- low solidifying point
- high flash point
- high heat resistance
- good solubility in a wide range of solvents
- release agent
- hydraulic fluid
- antifoam agent
- water-repellent agent
- liquid dielectric for electrical and electronic equipment
- heat-transfer oil
- polish additive
- plastics additive
- additive for textile and fiber auxiliaries
Due to Qunyue SILICONE FLUID's many diverse applications, no
general processing information can be provided. Parameters will
vary from application to
Available in a range of viscosities,Qunyue SILICONE FLUIDS AK are
miscible with each other in any ratio. The standard product's
viscosity can thus be altered to suit your individual needs.
Polydimethylsiloxane is a non-polar liquid and is immiscible with
polar solvents such as water or short-chain alcohols. In aliphatic
and aromatic hydrocarbons, chlorohydrocarbons, ethers, esters,
ketones and higher alcohols, Polydimethylsiloxane is soluble in any
Before the product is used with solvents for the first time, it is
advisable to perform a lab-scale test.
When solvents are used, please remember to read the appropriate
The 'Best use before end' date of each batch is shown on the
Storage beyond the date specified on the label does not necessarily
mean that the product is no longer usable. In this case however,
the properties required for the intended use must be checked for
quality assurance reasons.
Maximum temperature allowed during storage and transportation: 50
Comprehensive instructions are given in the corresponding Material
Safety Data Sheets. They are available on request from Qunyue
|Typical general characteristics||Value|
|Viscosity, dynamic at 25 °C||95 - 105 mPa.s|
|Density at 25 °C||approx. 0,96 g/cm3|
|Refractive index at 25°C||approx. 1,403|
|Surface tension at 25 °C||0,021 N/m|
|Flash point||> 275 °C|
|Viscosity, kinematic at 25 °C||from 1-25000 mm2/s|
These figures are only intended as a guide and should not be used
in preparing specifications.